Product Details:
| Packaging Size | 20 L |
| Brand | Asian Paints |
| Packaging Type | Drum |
| Form | Liquid |
| Country of Origin | Made in India |
| Colour | Red oxide |
| Gloss | Matt |
| Volume Solids | Approx. 55 % |
| Recommended DFT/ Coat | 60 microns |
| Flash point | Not less than 24 degC |
| Shelf Life (cool and dry place) | At least 12 months |
Stir the base and hardener separately. If settling is observed in the base or hardener, loosen the settled material with the help of hand stirrer followed by power driven stirrer for quick homogenous mixing. Mix hardener gradually into the base under continuous stirring as follows:
Direction for Use:New concrete surface; ensure that the concrete surface is cured for minimum 3 months. In case of large areas and for severe exposure conditions, the surface has to be prepared by light blasting. In less critical areas where blasting is not practical, wire brushing has to be adopted to remove lattices, followed by treating with dilute (10%) hydrochloric acid. Remove acid and contaminants by liberal wash with water. Ensure that acid solution does not retain on the surface & joints. Allow the surface to dry thoroughly before applying primer Old concrete surface; remove the surface contaminants like grease, oil etc., by solvent wiping or by 10% caustic solution. Preferably the surface has to be prepared by light blasting. In case, blasting is not practical, etch the surface to get a good profile by treating white dilute (10%) hydrochloric acid. Remove acid and contaminants by liberal wash with water. Ensure that acid solution does not retain and penetrate through the joints and concrete surface. Allow the surface to dry thoroughly before applying primer Þ Surface should be thoroughly dry before application of primer. This will have a major influence on the performance of the coating o o Surface temperature must be at least 3 C above dew point but not above 50 C
