Our range of products include salvaline alm paint, aluminium paint gold series, asian is 2339 aluminium paint, berger lumeros heat resisting alum paints, 200°c heat resistant aluminum paint and asian epoxy hb coating.
Mix the entire quantity of supplied aluminium paste thoroughly with a small quantity of medium and then add the mixture to the remaining medium. Stir well before use. Condition:
Steel, blast clean to Sa 2.5 of Swedish Specification
In case blast cleaning is not possible, surface should be cleaned to St 3 using power tools
Suitable conventional primer or epoxy primer, dry and free from any contamination
Features:
Excellent durability and corrosion resistance
Meets IS 2339 specification
Good adhesion and flexibility Heat resistance up to 120 C
Stir the base and hardener separately. If settling is observed in the base or hardener, loosen the settled material with the help of hand stirrer followed by power driven stirrer for quick homogenous mixing. Mix hardener gradually into the base under continuous stirring. Features:
Recommended as intermediate and/ or as a top coat in most of the epoxy systems
Can be recoated with epoxy, polyurethane, chlorinated rubber, acrylic and conventional coatings even after long weathering period
Good adhesion on aged epoxy coatings
Good resistance to water and splash of mild chemicals
Condition:
Suitable zinc primer, epoxy primer or epoxy intermediate coat; dry and free from all surface contamination. In case of aged epoxy coating, the surface should be sufficiently roughened prior to painting.
For application over weathered zinc primers, ensure white rust removal by thorough water scrubbing/ high pressure water cleaning. A mist coat is recommended when applied over zinc rich primers.
Substrate temperature must be at least 3° C above dew point but not above 50° C.
